5:10 PM kitchen shelf | ||||
How do I install a kitchen shelf? | Ask.com
Use an electronic sensor to search for the wall studs. Use a stud sensor for plaster walls. If you do not have a sensor of any kind, punch small holes in the wall with a nail and hammer. Mark the studs. Place the metal standard in between the points you marked on the studs. Mark where the screw hole meets the stud, and drill with a power drill using the 0.5-inch drill bit. Use a level and standard to find the bottom screw hole that is fixed on the wall. Drill another hole. Add a 2.5-inch hole above the first standard and pilot hole. Use a level to adjust the standard, and insert another screw in the bottom hole. Insert screws in the rest of the screw holes of the standard. Place a shelf bracket in the first standard and the other bracket in the second one. The second standard should be 32 inches from the first standard. Use a level to determine the correct position of the second standard. Mark the holes and drill. Install the screws in the same way as the first standard. Place the remaining brackets on the standards. Drill holes in the brackets where the mounting holes are located. Place the holes on the brackets. Use the wood screws to drill holes that are in the brackets. Screw halfway into the shelf so they are not visible on the top portion of the shelf. Install the remaining shelves.
| ||||
|
| ||||
| Total comments: 0 | |