#Cheap kitchen islands

We are so glad to have Stacy here to show us her amazing kitchen island makeover! (And psst we found Stacy and her great projects at the link party. so maybe you should come join this weekend!) Take it away, Stacy!

$20 Butcherblock Board and Batten Kitchen Island Makeover

Hello everyone!  I m Stacy from The Serene Swede where I blog about all types of DIY projects that can be done on a limited budget.  I am SO thrilled to be a guest today on Remodelaholic! I stalk this blog daily so imagine my surprise when they asked little ol me to be featured!  EEEK!!

Most days you can find me in a pair of paint splattered jeans with a cup of coffee in my hand and a dazed look on my face -more than likely contemplating what I can rip apart next.  My husband is pretty used to this look and somehow still manages to stick around and help me with all of my spur of the moment projects. He s cool like that

We purchased our builder basic home in 2008 and have been slowly making things more us ever since.  We are located in a wonderful neighborhood but unfortunately all the houses are built with pretty much the same interior design and style.  Armed with an eager imagination and a few tools, we set out to change that.  From our board and batten master bedroom to our staircase makeover. our home is starting to look much more custom than we ever even dreamed possible.

One of the first major changes we made was in the kitchen.  The kitchen is definitely the heart of the home for us.  We are always gathered around the kitchen island for conversations and it seems to be the most used piece of furniture in our home.    That being said, our island was built with breakfast bar area that served absolutely no purpose.  Our dining room is connected to the kitchen through an open floor plan and with the breakfast bar attached, there wasn t enough room for the dining chairs to slide back let alone ever have actual bar stools there. The picture quality is terrible and you can t see the table- but you get the idea.

Changes need to happen, my friend!

One day while lurking about in the Habitat for Humanity Restore, I stumbled upon all of the materials that I would need to create a board and batten looking island.  If you haven t check to see if there is a Restore in your area, please do.  They are awesome!

Their wood section can look  a little intimidating but if you re willing to dig, you can usually find exactly what you are looking for.

I snatched up the batten pieces (plywood), already ripped to identical widths (each at 6 ) and over 8 long for only $1 per piece! I bought all the pieces they had (5 of them) just in case I made any mistakes with my cuts.  The base board trim was also there for only $1 per piece so I grabbed that too.

I initially thought that I would have to head to IKEA and purchase the butcher block.

But then it happened.

The most magical thing happened!

An employee came wheeling a cart full of items to be put away and left it right by me, and I spotted it.  The glorious butcher block. I painstakingly hauled it to the counter to ask how much it was.  When the store clerk said, um, how s $5? I don t think I could have pulled my money out fast enough.  And if that wasn t good enough, the cart also had a large oak piece of wood that was perfect to cover the back of the island -once the bar was removed- for another $5.

Then  one day when the hubs was away and the kids were out of town, I took it upon myself to rip the island down to a basic cabinet and build it back up the way I had envisioned it to look in my head.  I didn t really know what I was up against because I couldn t for the life of me find anyone who had ever removed a breakfast bar, only people who added one.

Armed with a drill, I started by removing the counter top.  There were only four screws holding it together so it came off real quick!  Having the counter gone provided me a lot more light to be able to spot what was holding the back of the island on.

I guess you can tell that I forgot to take a picture of how much light there was until after the breakfast bar was removed, oops!!

I found 6 screw holes that I assumed were holding the bar part up and I just started removing them- hoping for the best! Sure enough, that puppy came crashing down and I caught it! Right before it would have smashed into my dining table-whew!

In case your wondering, yes, I always start project without any regard to the cleanliness of my house.

Things were looking up!

After assessing the new shape of the island, I decide that it wasn t necessary to use the large piece of oak that I bought for the area where the breakfast bar was attached but I was going use it anyway.  There was a solid backing there but it was laminate, not wood.  I was concerned that leaving it that way wouldn t go over so well when it came to painting time.

I attached the solid oak piece to the frame with liquid nails.  You ll notice a theme here with the liquid nails bit.

The island had a toe kick space underneath the cabinet area as well as on two sides that needed to be filled in before I could attach my base board molding.  To build out this area and have a solid surface for attaching, I cut out nine, 1 pieces of 2 4 and used these as spacers. (2 on each side and 3 underneath the cabinet area).  I then cut a 2 4 to the length of the island with mitered corners and glued it to the spacers.  This allowed for the base board molding to be attached to the island, look built in, and not have any risk of being to flimsy if it ever got kicked in.

I tried to create a small diagram to illustrate exactly what is going on underneath the molding because I may have gotten a little carried away and forgot to take pictures of this step!

You can see in the picture below that I left a small 1/2 gap between the floor and the molding because I knew that we will be replacing the flooring in our kitchen and will eventually be putting down some quarter round in that spot.

I carefully measured out the sizes needed for the vertical batten strips and I ran out to my garage to make my cuts.  Each side of the island had two vertical strips and two smaller horizontal strips while the back of the island (the area where the breakfast bar was removed) had three vertical strips (two long and one short) and two horizontal strips.  I choice this style to give it a little bit more dimension and character.

I attached the vertical pieces first with liquid nails and held it to the island with painters tape so it wouldn t slide.   Once those strips were in place, I carefully measured the gap in between them and cut the horizontal strips to fit in between.  Those babies were also attached with liquid nails.

Only a few more left to attach!

When you have them all attached, you can get to the funner stuff!

I used white paintable caulk to cover up any mistakes that I made while cutting and also to give it a real seamless look.  Caulk is pretty amazing at making anything look professional.