9:51 AM kitchen extractor fans | ||||
#How to select a domestic kitchen extractor fan Firstly, you need to measure the size of your domestic kitchen. To use our fan selection tool (located in the search area to the right) the measurements need to be in metres. DefinitionsKitchen only: If your kitchen is housed in a single room, the formula to select your domestic kitchen fan is as set out below. Kitchen with dining area: If you have a dining area as part o f the kitchen, you should only measure what you would consider the cooking area of the kitchen, and not include the dining part of the kitchen. Open plan kitchen and dining area: If you have an open plan kitchen and dining room, you should only factor in what you would consider the kitchen area. Let's say the length of your kitchen is 5 metres, the width is 4 metres, and the height is 2.8 metres. That would be: 5 x 4 x 2.8 = 56m3 (the volume). For a kitchen we recommend 20 air changes an hour, or a minimum of 216m3 an hour (or 60 litres a second). In this example the amount of air that should be extracted from the kitchen is: This is above the minimum we recommend of 216m3/hr. So in this example the fan required for a kitchen 5 metres x 4 metres x 2.8 metres is: Most domestic fan manufacturers publish the fan performance in m3/hr or litres per second (l/s). If you use our fan selection tool a list of fans suitable for your kitchen will be displayed. The only thing left to consider are: Important Note - Building regulations state "in a room with no openable window, an intermittent extract fan should be used with a run on facility set to a minimum of 15 minutes." We assume this is what the majority of people usually consider with price being the biggest driver. With that in mind, we would recommend you should consider the following:
Note on Extra Functions If you think yes!! I want my Kitchen extractor fan to have extra functions, we suggest where possible these are bought as separate items. For example if you want a fan with a humidistat, buy the fan and humidistat as two separate items, the reason? Buying the fan with a built in humidistat will cost a lot more than without, and if the fan or the humidistat becomes faulty (nothing last forever) you ll need to spend a more money to replace it. If you buy them as separate items, when one becomes faulty you only need to replace that part, thus saving money. Note: Code can only be used once per customer
| ||||
|
Total comments: 0 | |